Technical evaluation of resistance to compression in concretes made with CPCA cement
DOI:
https://doi.org/10.13140/RG.2.2.14542.87366Keywords:
compressive strength, Portland cement Type I, added cementAbstract
In recent years Venezuela has presented a crisis on the demand, commercialization and production of cement, the material needed for construction, therefor additive cements are being used without any type of regulations. This work presents the physical-mechanical characterization of three concrete mixtures with water / cement ratio of 0.45 and water / cement ratio of 0.60 with different types of Portland cement, Type I, Type CPCA1,and the third mixture corresponds to Type CPCA1 Rewarding it with a 15% addition in his own weight, developing a mixture of better quality. These concretes were characterized by: settling, setting time, percentage of total porosity, percentage of water absorption and mechanical resistance to compression. The results showed that the concrete mixture produced with CPCA1 does not meet the minimum requirements established in the Venezuelan standard for use in the elaboration of structural concrete, because among other parameters its resistance to compression it’s below the design value. As for the CPCA1 giving it 15% addition in its own weight meets the requirements, and can be used in the manufacture of concrete structural elements.
Downloads
Published
Issue
Section
License
The opinions expressed by the authors do not necessarily reflect the position of the editor of the publication or UCLA. The total or partial reproduction of the texts published here is authorized, provided that the complete source and electronic address of this journal is cited. Authors have the right to use their articles for any purpose as long as it is done nonprofit. The authors can post on the internet or any other media the final approved version of their work.
